VNNOX_English
Page tree

Versions Compared

Old Version 6

changes.mady.by.user NovaStar

Saved on

compared with

New Version 7

changes.mady.by.user NovaStar

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Update player status
  • Authorize players
  • Rename players

  • Upgrade terminal players

  • Delete players

  • 分组播放器

...

  • Group players

See detailed introduction of authorizing players, upgrading terminal players and grouping players in Authorizing Players, Upgrading Terminal Players and Grouping Players.


Expand
titleCreating Players with VPlayer

Step 1    Open VPlayer, as shown in Figure 4-1.

Figure 4-1 The Config tab

Step 2     In the Config tab page, click New.

Step 3      Enter the server name and address and then click OK. The Server Address must be consistent with the address in VNNOX.

Step 4     Enter the authentication user name and password which must be consistent with those in VNNOX.

Step 5      Click Get and then click OK to close the prompt box. Bind and create player will be displayed in the drop-down options.

Step 6    Click OK.

After the player is bound successfully, is displayed at the bottom left of the page.


 前提条件

      • 已获取Taurus的WiFi AP的SSID和密码。SSID默认为"AP+SN后8位数字"，默认密码为"12345678"。
      • 已获取登录Taurus的"admin"用户的密码。"admin"用户的默认密码为"123456"。
      • Taurus已连接互联网。

操作步骤

步骤1      连接Taurus系列产品的WiFi AP。

步骤2      打开ViPlex Express。

步骤3      单击“刷新”，刷新屏体列表。

ViPlex Express检测到Taurus后，会使用默认帐户或上次成功登录的帐户尝试自动登录一次。

          • Image Removed：表示Taurus在线，可以登录，执行步骤4。
          • Image Removed：表示Taurus离线，不能登录。
          • Image Removed：表示已成功登录Taurus。

步骤4      单击屏体信息后的“连接”。

步骤5      输入“admin”用户的密码，单击“确定”。

登录成功后，ViPlex Express自动保存帐户信息。

步骤6      选择“终端控制”。

步骤7      单击“服务器配置”。

步骤8      在终端列表中选中目标终端。

Image Removed

步骤9      选择服务器，输入播放器的认证用户名和认证密码。认证信息必须与VNNOX中的一致。

步骤10      单击“播放器”后的 Image Removed，从下拉项中选择“绑定到Vnnox lite平台”。

步骤11      单击“绑定”。
Expand
Expand
title通过ViPlex Express（Windows版）新建
title通过ViPlex Handy（Android和iOS版）新建

前提条件

      • 已获取Taurus的WiFi AP的SSID和密码。SSID默认为"AP+SN后8位数字"，默认密码为"12345678"。
      • 已获取登录Taurus的"admin"用户的密码。"admin"用户的默认密码为"123456"。
      • Taurus已连接互联网。

操作步骤

步骤1      连接Taurus系列产品的WiFi AP。

步骤2      打开ViPlex Handy。

ViPlex Handy自动检测Taurus，并刷新屏体列表。用户也可以向下滑动屏体列表进行手动刷新。

          • Image Removed：表示Taurus在线，可以登录，执行步骤3。
          • Image Removed：表示Taurus离线，不能登录。

步骤3      单击屏体名称后的"连接"。

步骤4      输入用户名和密码，单击"登录"。

登录成功后，显示Image Removed，ViPlex Handy自动保存帐户信息。

步骤5      单击屏体名称，进入"屏体管理"界面。

步骤6      选择"远程管理 > 播放机绑定"。

Image Removed

步骤7      选择服务器，输入播放器的认证用户名和认证密码。认证信息必须与VNNOX中的一致。

步骤8      单击“获取”，并从下拉项中选择“绑定并新建播放器”。

步骤9      单击"确定"。

Creating Players with ViPlex Handy (Android and iOS)

Before You Begin

      • Get the SSID and password of WiFi AP of the Taurus. The default SSID is “AP+the last 8 digits”. The default password is “12345678”.
      • Get the password of the user “admin”. The default password of the user “admin” is “123456”.
      • Connect the Taurus to Internet.

Operating Steps

Step 1     Connect to the WiFi AP of the Taurus products.

Step 2     Start ViPlex Handy.

ViPlex Handy automatically detects the Taurus and refreshes the screen list. Users can also swipe down to manually refresh the screen list.

          • Image Added: Denotes that the Taurus is online and you can log in to it. Go to Step 3.
          • Image Added: Denotes that Taurus is offline and you cannot log into it.

Step 3     Tap Connect next to the screen name.

Step 4     Enter username and password, and tap Login.

After successful login, Image Added is displayed. ViPlex Handy saves the account information automatically.

Step 5     Tap a screen name to enter the Screen management page.

Step 6     Select Remote Management > Player Binding.

Image Added

Step 7     Select a server. Enter the authentication user name and password of the player. The authentication information must be consistent with the authentication information in VNNOX.

Step 8     Tap Obtain and select Bind and create player from the drop-down box.

Step 9     Tap OK.


Expand
titleCreating Players with ViPlex Express (Windows)

 Before You Begin

      • Get the SSID and password of WiFi AP of the Taurus. The default SSID is “AP+the last 8 digits”. The default password is “12345678”.
      • Get the password of the user “admin”. The default password of the user “admin” is “123456”.
      • Connect the Taurus to Internet.

Operating Steps

Step 1     Connect to the WiFi AP of the Taurus products.

Step 2     Start ViPlex Express.

Step 3     Click Refresh to refresh the screen list.

After detecting the Taurus, ViPlex Express will try to log in to the Taurus with the default account or the account used for last login.

          • Image Added: Denotes that the Taurus is online and you can log in to it. Go to Step 4.
          • Image Added: Denotes the Taurus is offline and you cannot log into it.
          • Image Added: Denotes logging into the Taurus is successful.

Step 4     Click Connect on the right of the screen information.

Step 5     Enter the password for the "admin" user and then click OK.

After successful login, ViPlex Express saves the account information automatically.

Step 6     Select Screen Control.

Step 7     Click Server configuration.

Step 8     Select the target terminal in the terminal list.

Image Added

Step 9     Select a server. Enter the authentication user name and password of the player. The authentication information must be consistent with the authentication information in VNNOX.

Step 10   Click Image Added next to Player and select Bind to VNNOX Lite from the drop-down list.

Step 11   Click Bind.