步骤1 打开VPlayer，如图5-6所示。
图5-6 "配置"界面
步骤2 在“配置”中，单击“新建”。
步骤3 输入服务器名称和地址，单击“确定”。其中，“服务器地址”必须与VNNOX中的一致。
步骤4 输入认证用户名和认证密码。值必须与VNNOX中的一致。
步骤5 单击“获取”，并单击“确定”关闭提示框。
步骤6 选择一个播放器，单击“确定”。
...
Prerequisites
- VPlayer is installed.
- The PC with VPlayer installed is connected to the Internet.
Operating Procedure
Step 1 Open VPlayer, as shown in Figure 1-5.
Figure 1-5 The Config page
Step 2 On the Config tab page, select a server from the drop-down options, or click New to add a server.
When you add a server, make sure that the server address must be the same as the address in VNNOX.
Step 3 Enter the authentication user name and password.
The authentication information must be the same as the VNNOX Standard/AD Authentication Information in VNNOX. For details, see 5.2.1.2.1 Viewing Player Authentication Information.
Figure 1-6 Authentication information
Step 4 Click OK.
Step 5 In the prompt box which says the player was bound successfully, click OK.
After the player is bound successfully, the page shown in Figure 1-7 is displayed.
Figure 1-7 Binding successful
