Wired Network

   Connect an Ethernet cable to the Ethernet port on the device.

Wi-Fi Network

ViPlex Handy

   Step 1     Connect your phone to the Wi-Fi AP of the device. (The default SSID is "AP+Last 8 digits of SN" and the default password is printed on the SSID label of the product.)

   Step 2     Open ViPlex Handy and tap Add Device.

   Step 3     On the Device Management page, search for and connect to the device. (The user name is "admin"  and the default password is printed on the SSID label of the product.)

   Step 4     Return to the homepage and choose Screen Management > Network Settings > Wireless Network to turn on Wi-Fi and select or add a network.

ViPlex Express

   Step 1     Open ViPlex Express. Turn on DHCP Service at the the bottom left, select a local IP address and click OK.

   Step 2     Click Refresh to refresh the device list. Connect to the device. (The user name is "admin" and the default password is printed on the SSID label of the product.)

   Step 3     Choose Terminal Control > Network configuration.

   Step 4     Select the target device from the device list.

   Step 5     Go to Wi-Fi Network > Player Wi-Fi AP and do the following as required.

• • • • AP: Turn on/off the device Wi-Fi AP.
      • Hotspot Name and Password: Change the SSID and password of the terminal Wi-Fi AP. (The default SSID of the Taurus series and EMP400B is "AP+Last 8 digits of SN" and the default password is printed on the SSID label of the product.)
      • Isolate from Local Network: After enabled, the Wi-Fi AP of the terminal is isolated from the local network and users cannot access the local network by connecting to the Wi-Fi AP.
      • Advanced > Channel: Switch the channel of the Wi-Fi AP. (The channel can be switched when the terminal software is V2.2.0 or later.)

        Figure 1 Player Wi-Fi AP configuration

   Step 6     Click Apply.