Users can remotely control screen brightness, volume, video source, screen status, power and synchronous playback terminal players in real time and can restart and monitor or as scheduled and sync time for terminal players.
When users transfer players to VNNOX AD, scheduled control data will be transferred together with the players.
Step 1 Choose Player Control.
Step 2 Click Click an icon to enter the corresponding page.
Table 4-3 Description of real-time control3 Function description
Function | Description |
|---|---|
Brightness Control | Adjust screen brightness. |
Volume Control | Adjust screen volume. |
Video Source Switching | Switch between internal video source and HDMI video source. |
Player Restart | Restart terminal players which takes about 20 seconds. The player is offline while being restarted. |
Screen Status Control | Switch between normal display and black screen. |
Monitor | View terminal player disk usage and data usage and clean up media. |
Power Control | Turn on or off screen power. Allows for real-time control of screen power control through board power and multifunction card power configuration. |
Time Synchronization | Sync time for terminal players. |
Synchronous Playback | Turn on or off synchronous playback. |
Playback Management | Capture screenshots of the current playing content to check whether the playback is normal. |
Step 3 On the left of the page, select the target online players.
Step 4 (Optional) On the right of the page, Perform any of the following operation as required.
- Remote real-time control
Applicable to brightness adjustment, volume adjustment, video source switching, player restart, screen status control, monitoring, power control and synchronous playback.
Users can view real-time brightness, volume, video source status, screen status or power status.
...
If multiple online players are selected, only the real-time status of the first player
...
is displayed.
Step 5 Perform the following operations based on the actual situation.
- To restart players, click
- For the player restart function, click Restart Now.
- For the monitoring function,
click - click Media Cleanup. If users
choose - want to clean up the media
that is - being played
at the same time- , the screen may go black.
- For playback management function, click Recapture. After a screenshot is captured, the screenshot, the date and time when it was captured, and solution source are displayed.
- For other functions, set the function parameters and click Apply.
- Remote scheduled control
Applicable to brightness adjustment, volume adjustment, video source switching, player restart, screen status control and power control.
In the Scheduled Control area, perform the following operations as required and then click Apply.
- Create a plan: Click
to set command parameters and then click OK. - Change a plan: Select a plan, click
, change command parameters
and click Apply- Create a plan: Click
- , and then click OK.
- Delete a plan: select one or multiple plans and click
. - Enable a plan: Set the toggle button to
.
- Time synchronization
Select a time synchronization method as required and then click Apply.
Table 4-4 Description of time synchronization methods
| Method | Applicable To | Time Reference | Description |
|---|---|---|---|
| Manual | Taurus | Time of the selected time zone | After you select a time zone, the new time will be displayed. |
| NTP | VPlayer Taurus | Time of NTP server | Click |
| RF (Radio Frequency) | Taurus | Time of the reference device | You need to buy and install RF devices before time synchronization.
|
