Users can remotely control screen brightness, volume, video source, screen status, power and synchronous playback in real time and can restart and monitor terminal players.
Step 1 Choose Player Control.
Step 2 Click an icon to enter the corresponding page.
Table 4-3 Description of real-time control
...
...
...
Brightness Control
...
Adjust screen brightness.
...
Volume Control
...
Adjust screen volume.
...
Video Source Switching
...
Switch between internal video source and HDMI video source.
...
Player Restart
...
Restart terminal players which takes about 20 seconds. The player is offline while being restarted.
...
Screen Status Control
...
Switch between normal display and black screen.
...
Monitor
...
Power Control
...
Turn on or off screen power.
Allows for real-time control of screen power through board power and multifunction card power configuration.
...
Synchronous Playback
...
Turn on or off synchronous playback.
Step 3 On the left of the page, select the target online players.
Step 4 (Optional) On the right of the page, view real-time brightness, volume, video source, screen status or power status.
If multiple players are selected, only the real time status of the first player will be displayed.
Step 5 Perform the following operations based on the actual situation.
...
Scenarios
Adjust brightness manually or set rules for smart brightness adjustment.
Operating Procedure
Step 1 From the menu bar, choose Control.
Step 2 Click Brightness Control.
Step 3 On the left of the page, select the target online player.
Step 4 Do any of the following as required.
- Real-time control: Adjust the screen brightness by dragging the slider or entering a number and then click Apply.
- Scheduled control: In the Scheduled Control area, click
. Set the command parameters, click OK, and then click Apply.
- Scheduled control: In the Scheduled Control area, click
-Scheduled Control: The screen brightness within the specified time range is the brightness you set.
-Auto Control: The screen brightness within the specified time range changes automatically according to the brightness mapping table.
To add an automatic control command for brightness control, set the automatic brightness control parameters, namely, the relationship between the ambient brightness and screen brightness.
1.Click Set Auto Brightness Control Parameters.
2.Click Add to set the relationship between the ambient brightness and screen brightness.
You can also click Quick Subsection to quickly configure the mapping relationship of ambient brightness.
