Page tree
Skip to end of metadata
Go to start of metadata

Connect an Ethernet cable to the Ethernet port of the device.

The network of the LC2K cannot be configured with VNNOX and ViPlex. Please configure network connection in the system of the LC2K.

ViPlex Handy

Step 1     Connect your phone to the Wi-Fi AP of the device. (Default name: "AP+Last 8 digits of SN", default password: "12345678")

Step 2     Open ViPlex Handy, go to Local Control > Local Devices, find and connect to the device. (User name: "admin", default password: "123456")

Step 3     Click the device, go to Device Management > Network Settings > Wired Network Settings to turn on Wi-Fi and select or add a wireless network.


ViPlex Express

Step 1     Open ViPlex Express, turn on DHCP Service at the lower left, select a local IP address, and click OK.

Step 2     Click Refresh and connect to the device. (User name: "admin", default password: "123456")

Step 3     Choose Terminal Control > Network configuration.

Step 4     Select the target terminal from the terminal list.

     

Step 5     Choose Wi-Fi-STA Mode. Select a Wi-Fi network and enter the SSID and password in the pop-up box that appears.

Contact local dealers to buy and install the 4G module.

  • No labels