VNNOX_English
Page tree
FunctionOIDTypeDescriptionDefault ValueNormal Value
SNMP GET (Read-only)
System time and date.1.3.6.1.4.1.319.1.3.0.0.0.0LongUTC time01564107018850
Device SN.1.3.6.1.4.1.319.1.3.0.0.0.2StringUnique ID number of a devicenullBZSA07313J0350001020
MAC address.1.3.6.1.4.1.319.1.3.0.0.0.3StringDevice MAC addressnull303402faf47c
IP Address.1.3.6.1.4.1.319.1.3.0.0.0.4StringDevice IP address listnull["192.168.41.1","192.168.1.106"]
DVI input status.1.3.6.1.4.1.319.1.3.1.0.0.0IntVideo source signal status 1: Active signal 0: No signal01
Screen width.1.3.6.1.4.1.319.1.3.1.0.0.1LongScreen width set during screen configuration064
Screen height.1.3.6.1.4.1.319.1.3.1.0.0.2LongScreen height set during screen configuration032
Statuses of the Ethernet ports on sending cards .1.3.6.1.4.1.319.1.3.1.0.0.4LongConnection status of device Ethernet ports Each bit denotes the connection status of an Ethernet port. 1: Connected 0: Disconnected00001: Ethernet port 1 is connected. 0010: Ethernet port 2 is connected. 0100: Ethernet port 3 is connected. 1000: Ethernet port 4 is connected. 1111: Ethernet ports 1, 2, 3 and 4 are all connected. The above values are binary and the actual values are displayed with a decimal representation. For example, the value of 0001 is 1, the value of 0010 is 2, the value of 0100 is 4 and the value of 1000 is 8.
Number of Ethernet ports a sending card.1.3.6.1.4.1.319.1.3.1.0.0.5LongNumber of Ethernet ports on a device04 denotes that there are 4 Ethernet ports.
Number of receiving cards connected to Ethernet port 1 of controller.1.3.6.1.4.1.319.1.3.1.0.0.6LongNumber of receiving cards loaded by Ethernet port 1 (set during screen configuration)02 denotes that Ethernet port 1 loads 2 receiving cards.
Number of receiving cards connected to Ethernet port 2 of controller.1.3.6.1.4.1.319.1.3.1.0.0.7LongNumber of receiving cards loaded by Ethernet port 2 (set during screen configuration)02 denotes that Ethernet port 2 loads 2 receiving cards.
Number of receiving cards connected to Ethernet port 3 of controller.1.3.6.1.4.1.319.1.3.1.0.0.8LongNumber of receiving cards loaded by Ethernet port 3 (set during screen configuration)02 denotes that Ethernet port 3 loads 2 receiving cards.
Number of receiving cards connected to Ethernet port 4 of controller.1.3.6.1.4.1.319.1.3.1.0.0.9LongNumber of receiving cards loaded by Ethernet port 4 (set during screen configuration)02 denotes that Ethernet port 4 loads 2 receiving cards.
Screen brightness.1.3.6.1.4.1.319.1.3.1.1.0.4LongScreen brightness-1100 denotes that the screen brightness is 100.
Working statuses of receiving cards 1–64 loaded by Ethernet port 1 .1.3.6.1.4.1.319.1.3.2.0.0.0Long(64)Working statuses of receiving cards 1–64 loaded by Ethernet port 1 Each bit denotes the the working status of a receiving card. 1: Normal 0: Abnormal0For example, Ethernet port 1 loads 2 receiving cards. If the value is 1, it is 0001 in binary representation which denotes that the working status of the first receiving card is normal and the working status of the second receiving card is abnormal. If the value is 3, it is 0011 in binary representation which denotes that the working statuses of both the first and second receiving cards are normal.
Working statuses of receiving cards 65-128 loaded by Ethernet port 1.1.3.6.1.4.1.319.1.3.2.0.0.1Long(64)Working statuses of receiving cards 65-128 loaded by Ethernet port 1 Each bit denotes the the working status of a receiving card. 1: Normal 0: Abnormal0Ditto
Working statuses of receiving cards 129-192 loaded by Ethernet port 1.1.3.6.1.4.1.319.1.3.2.0.0.2Long(64)Working statuses of receiving cards 129-192 loaded by Ethernet port 1 Each bit denotes the the working status of a receiving card. 1: Normal 0: Abnormal0Ditto
Working statuses of receiving cards 193-256 loaded by Ethernet port 1.1.3.6.1.4.1.319.1.3.2.0.0.3Long(64)Working statuses of receiving cards 193-192 loaded by Ethernet port 1 Each bit denotes the the working status of a receiving card. 1: Normal 0: Abnormal0Ditto
PSU statuses of receiving cards 1–64 loaded by Ethernet port 1.1.3.6.1.4.1.319.1.3.2.0.0.4Long(64)Power supply statuses of receiving cards 1–64 loaded by Ethernet port 1 Each bit denotes the the power supply status of a receiving card. 1: Normal 0: Abnormal0For example, Ethernet port 1 loads 2 receiving cards. If the value is 1, it is 0001 in binary representation which denotes that the power supply status of the first receiving card is normal and the power supply status of the second receiving card is abnormal. If the value is 3, it is 0011 in binary representation which denotes that the power supply statuses of both the first and second receiving cards are normal.
PSU statuses of receiving cards 65-128 loaded by Ethernet port 1.1.3.6.1.4.1.319.1.3.2.0.0.5Long(64)Power supply statuses of receiving cards 65-128 loaded by Ethernet port 1 Each bit denotes the the power supply status of a receiving card. 1: Normal 0: Abnormal0Ditto
PSU statuses of receiving cards 129-192 loaded by Ethernet port 1.1.3.6.1.4.1.319.1.3.2.0.0.6Long(64)Power supply statuses of receiving cards 129-192 loaded by Ethernet port 1 Each bit denotes the the power supply status of a receiving card. 1: Normal 0: Abnormal0Ditto
PSU statuses of receiving cards 193-256 loaded by Ethernet port 1.1.3.6.1.4.1.319.1.3.2.0.0.7Long(64)Power supply statuses of receiving cards 193-256 loaded by Ethernet port 1 Each bit denotes the the power supply status of a receiving card. 1: Normal 0: Abnormal0Ditto
Working statuses of receiving cards 1-64 loaded by Ethernet port 2.1.3.6.1.4.1.319.1.3.3.0.0.0Long(64)Working statuses of receiving cards 1-64 loaded by Ethernet port 2 Each bit denotes the the working status of a receiving card. 1: Normal 0: Abnormal0For example, Ethernet port 2 loads 2 receiving cards. If the value is 1, it is 0001 in binary representation which denotes that the working status of the first receiving card is normal and the working status of the second receiving card is abnormal. If the value is 3, it is 0011 in binary representation which denotes that the working statuses of both the first and second receiving cards are normal.
Working statuses of receiving cards 65-128 loaded by Ethernet port 2.1.3.6.1.4.1.319.1.3.3.0.0.1Long(64)Working statuses of receiving cards 65-128 loaded by Ethernet port 2 Each bit denotes the the working status of a receiving card. 1: Normal 0: Abnormal0Ditto
Working statuses of receiving cards 129-192 loaded by Ethernet port 2.1.3.6.1.4.1.319.1.3.3.0.0.2Long(64)Working statuses of receiving cards 129-192 loaded by Ethernet port 2 Each bit denotes the the working status of a receiving card. 1: Normal 0: Abnormal0Ditto
Working statuses of receiving cards 193-256 loaded by Ethernet port 2.1.3.6.1.4.1.319.1.3.3.0.0.3Long(64)Working statuses of receiving cards 193-256 loaded by Ethernet port 2 Each bit denotes the the working status of a receiving card. 1: Normal 0: Abnormal0Ditto
PSU statuses of receiving cards 1-64 loaded by Ethernet port 2.1.3.6.1.4.1.319.1.3.3.0.0.4Long(64)Power supply statuses of receiving cards 1-64 loaded by Ethernet port 2 Each bit denotes the the power supply status of a receiving card. 1: Normal 0: Abnormal0For example, Ethernet port 2 loads 2 receiving cards. If the value is 1, it is 0001 in binary representation which denotes that the power supply status of the first receiving card is normal and the power supply status of the second receiving card is abnormal. If the value is 3, it is 0011 in binary representation which denotes that the power supply statuses of both the first and second receiving cards are normal.
PSU statuses of receiving cards 65-128 loaded by Ethernet port 2.1.3.6.1.4.1.319.1.3.3.0.0.5Long(64)Power supply statuses of receiving cards 65-128 loaded by Ethernet port 2 Each bit denotes the the power supply status of a receiving card. 1: Normal 0: Abnormal0Ditto
PSU statuses of receiving cards 129-192 loaded by Ethernet port 2.1.3.6.1.4.1.319.1.3.3.0.0.6Long(64)Power supply statuses of receiving cards 129-192 loaded by Ethernet port 2 Each bit denotes the the power supply status of a receiving card. 1: Normal 0: Abnormal0Ditto
PSU statuses of receiving cards 193-256 loaded by Ethernet port 2.1.3.6.1.4.1.319.1.3.3.0.0.7Long(64)Power supply statuses of receiving cards 193-256 loaded by Ethernet port 2 Each bit denotes the the power supply status of a receiving card. 1: Normal 0: Abnormal0Ditto
Working statuses of receiving cards 1-64 loaded by Ethernet port 3.1.3.6.1.4.1.319.1.3.4.0.0.0Long(64)Working statuses of receiving cards 1-64 loaded by Ethernet port 3 Each bit denotes the the working status of a receiving card. 1: Normal 0: Abnormal0For example, Ethernet port 3 loads 2 receiving cards. If the value is 1, it is 0001 in binary representation which denotes that the working status of the first receiving card is normal and the working status of the second receiving card is abnormal. If the value is 3, it is 0011 in binary representation which denotes that the working statuses of both the first and second receiving cards are normal.
Working statuses of receiving cards 65-128 loaded by Ethernet port 3.1.3.6.1.4.1.319.1.3.4.0.0.1Long(64)Working statuses of receiving cards 65-128 loaded by Ethernet port 3 Each bit denotes the the working status of a receiving card. 1: Normal 0: Abnormal0Ditto
Working statuses of receiving cards 129-192 loaded by Ethernet port 3.1.3.6.1.4.1.319.1.3.4.0.0.2Long(64)Working statuses of receiving cards 129-192 loaded by Ethernet port 3 Each bit denotes the the working status of a receiving card. 1: Normal 0: Abnormal0Ditto
Working statuses of receiving cards 193-256 loaded by Ethernet port 3.1.3.6.1.4.1.319.1.3.4.0.0.3Long(64)Working statuses of receiving cards 193-256 loaded by Ethernet port 3 Each bit denotes the the working status of a receiving card. 1: Normal 0: Abnormal0Ditto
PSU statuses of receiving cards 1-64 loaded by Ethernet port 3.1.3.6.1.4.1.319.1.3.4.0.0.4Long(64)Power supply statuses of receiving cards 1-64 loaded by Ethernet port 3 Each bit denotes the the power supply status of a receiving card. 1: Normal 0: Abnormal0For example, Ethernet port 3 loads 2 receiving cards. If the value is 1, it is 0001 in binary representation which denotes that the power supply status of the first receiving card is normal and the power supply status of the second receiving card is abnormal. If the value is 3, it is 0011 in binary representation which denotes that the power supply statuses of both the first and second receiving cards are normal.
PSU statuses of receiving cards 65-128 loaded by Ethernet port 3.1.3.6.1.4.1.319.1.3.4.0.0.5Long(64)Power supply statuses of receiving cards 65-128 loaded by Ethernet port 3 Each bit denotes the the power supply status of a receiving card. 1: Normal 0: Abnormal0Ditto
PSU statuses of receiving cards 129-192 loaded by Ethernet port 3.1.3.6.1.4.1.319.1.3.4.0.0.6Long(64)Power supply statuses of receiving cards 129-192 loaded by Ethernet port 3 Each bit denotes the the power supply status of a receiving card. 1: Normal 0: Abnormal0Ditto
PSU statuses of receiving cards 193-256 loaded by Ethernet port 3.1.3.6.1.4.1.319.1.3.4.0.0.7Long(64)Power supply statuses of receiving cards 193-256 loaded by Ethernet port 3 Each bit denotes the the power supply status of a receiving card. 1: Normal 0: Abnormal0Ditto
Working statuses of receiving cards 1-64 loaded by Ethernet port 4.1.3.6.1.4.1.319.1.3.5.0.0.0Long(64)Working statuses of receiving cards 1-64 loaded by Ethernet port 4 Each bit denotes the the working status of a receiving card. 1: Normal 0: Abnormal0For example, Ethernet port 4 loads 2 receiving cards. If the value is 1, it is 0001 in binary representation which denotes that the working status of the first receiving card is normal and the working status of the second receiving card is abnormal. If the value is 3, it is 0011 in binary representation which denotes that the working statuses of both the first and second receiving cards are normal.
Working statuses of receiving cards 65-128 loaded by Ethernet port 4.1.3.6.1.4.1.319.1.3.5.0.0.1Long(64)Working statuses of receiving cards 65-128 loaded by Ethernet port 4 Each bit denotes the the working status of a receiving card. 1: Normal 0: Abnormal0Ditto
Working statuses of receiving cards 129-192 loaded by Ethernet port 4.1.3.6.1.4.1.319.1.3.5.0.0.2Long(64)Working statuses of receiving cards 129-192 loaded by Ethernet port 4 Each bit denotes the the working status of a receiving card. 1: Normal 0: Abnormal0Ditto
Working statuses of receiving cards 193-256 loaded by Ethernet port 4.1.3.6.1.4.1.319.1.3.5.0.0.3Long(64)Working statuses of receiving cards 193-256 loaded by Ethernet port 4 Each bit denotes the the working status of a receiving card. 1: Normal 0: Abnormal0Ditto
PSU statuses of receiving cards 1-64 loaded by Ethernet port 4.1.3.6.1.4.1.319.1.3.5.0.0.4Long(64)Power supply statuses of receiving cards 1-64 loaded by Ethernet port 4 Each bit denotes the the power supply status of a receiving card. 1: Normal 0: Abnormal0For example, Ethernet port 4 loads 2 receiving cards. If the value is 1, it is 0001 in binary representation which denotes that the power supply status of the first receiving card is normal and the power supply status of the second receiving card is abnormal. If the value is 3, it is 0011 in binary representation which denotes that the power supply statuses of both the first and second receiving cards are normal.
PSU statuses of receiving cards 65-128 loaded by Ethernet port 4.1.3.6.1.4.1.319.1.3.5.0.0.5Long(64)Power supply statuses of receiving cards 65-128 loaded by Ethernet port 4 Each bit denotes the the power supply status of a receiving card. 1: Normal 0: Abnormal0Ditto
PSU statuses of receiving cards 129-192 loaded by Ethernet port 4.1.3.6.1.4.1.319.1.3.5.0.0.6Long(64)Power supply statuses of receiving cards 129-192 loaded by Ethernet port 4 Each bit denotes the the power supply status of a receiving card. 1: Normal 0: Abnormal0Ditto
PSU statuses of receiving cards 193-256 loaded by Ethernet port 4.1.3.6.1.4.1.319.1.3.5.0.0.7Long(64)Power supply statuses of receiving cards 193-256 loaded by Ethernet port 4 Each bit denotes the the power supply status of a receiving card. 1: Normal 0: Abnormal0Ditto
SNMP TRAP (Read-only)
Controller status.1.3.6.1.4.1.319.1.4.0.0.0.0StringReport the working status of a controller. “OK” is returned when the controller works properly.nullOK
DVI status.1.3.6.1.4.1.319.1.4.0.0.0.1IntReport DVI status 1: Active signal 2: No Signal01
Average receiving card temperature.1.3.6.1.4.1.319.1.4.0.0.0.4StringReport the average temperature of the receiving cards loaded by the sending card#REF!36°C denotes the screen temperature is 36°C.
Hardware monitoring data.1.3.6.1.4.1.319.1.4.0.0.0.7StringReport the monitoring information related to hardware. Information to report: Sending card: working status, DVI status, frame rate, Ethernet port redundancy status Receiving card: working status, location, temperature, voltage Monitoring card: working status, location, cabinet door status, fan status, humidity, smoke, flat cable, temperature Smart brightness: ambient brightness and screen brightnessNull stringjson string
Connection alarms of receiving cards 1–64 loaded by Ethernet port 1.1.3.6.1.4.1.319.1.4.1.0.0.0Long(64)See the descriptions of working statuses and PSU statuses of receiving cards 0See the descriptions of working statuses and PSU statuses of receiving cards
Connection alarms of receiving cards 65-128 loaded by Ethernet port 1.1.3.6.1.4.1.319.1.4.1.0.0.1Long(64)Ditto0Ditto
Connection alarms of receiving cards 129-192 loaded by Ethernet port 1.1.3.6.1.4.1.319.1.4.1.0.0.2Long(64)Ditto0Ditto
Connection alarms of receiving cards 193-256 loaded by Ethernet port 1.1.3.6.1.4.1.319.1.4.1.0.0.3Long(64)Ditto0Ditto
PSU alarms of receiving cards 1–64 loaded by Ethernet port 1.1.3.6.1.4.1.319.1.4.1.0.0.4Long(64)Ditto0Ditto
PSU alarms of receiving cards 65-128 loaded by Ethernet port 1.1.3.6.1.4.1.319.1.4.1.0.0.5Long(64)Ditto0Ditto
PSU alarms of receiving cards 129-192 loaded by Ethernet port 1.1.3.6.1.4.1.319.1.4.1.0.0.6Long(64)Ditto0Ditto
PSU alarms of receiving cards 193-256 loaded by Ethernet port 1.1.3.6.1.4.1.319.1.4.1.0.0.7Long(64)Ditto0Ditto
Connection alarms of receiving cards 1-64 loaded by Ethernet port 2.1.3.6.1.4.1.319.1.4.2.0.0.0Long(64)Ditto0Ditto
Connection alarms of receiving cards 65-128 loaded by Ethernet port 2.1.3.6.1.4.1.319.1.4.2.0.0.1Long(64)Ditto0Ditto
Connection alarms of receiving cards 129-192 loaded by Ethernet port 2.1.3.6.1.4.1.319.1.4.2.0.0.2Long(64)Ditto0Ditto
Connection alarms of receiving cards 193-256 loaded by Ethernet port 2.1.3.6.1.4.1.319.1.4.2.0.0.3Long(64)Ditto0Ditto
PSU alarms of receiving cards 1-64 loaded by Ethernet port 2.1.3.6.1.4.1.319.1.4.2.0.0.4Long(64)Ditto0Ditto
PSU alarms of receiving cards 65-128 loaded by Ethernet port 2.1.3.6.1.4.1.319.1.4.2.0.0.5Long(64)Ditto0Ditto
PSU alarms of receiving cards 129-192 loaded by Ethernet port 2.1.3.6.1.4.1.319.1.4.2.0.0.6Long(64)Ditto0Ditto
PSU alarms of receiving cards 193-256 loaded by Ethernet port 2.1.3.6.1.4.1.319.1.4.2.0.0.7Long(64)Ditto0Ditto
Connection alarms of receiving cards 1-64 loaded by Ethernet port 3.1.3.6.1.4.1.319.1.4.3.0.0.0Long(64)Ditto0Ditto
Connection alarms of receiving cards 65-128 loaded by Ethernet port 3.1.3.6.1.4.1.319.1.4.3.0.0.1Long(64)Ditto0Ditto
Connection alarms of receiving cards 129-192 loaded by Ethernet port 3.1.3.6.1.4.1.319.1.4.3.0.0.2Long(64)Ditto0Ditto
Connection alarms of receiving cards 193-256 loaded by Ethernet port 3.1.3.6.1.4.1.319.1.4.3.0.0.3Long(64)Ditto0Ditto
PSU alarms of receiving cards 1-64 loaded by Ethernet port 3.1.3.6.1.4.1.319.1.4.3.0.0.4Long(64)Ditto0Ditto
PSU alarms of receiving cards 65-128 loaded by Ethernet port 3.1.3.6.1.4.1.319.1.4.3.0.0.5Long(64)Ditto0Ditto
PSU alarms of receiving cards 129-192 loaded by Ethernet port 3.1.3.6.1.4.1.319.1.4.3.0.0.6Long(64)Ditto0Ditto
PSU alarms of receiving cards 193-256 loaded by Ethernet port 3.1.3.6.1.4.1.319.1.4.3.0.0.7Long(64)Ditto0Ditto
Connection alarms of receiving cards 1-64 loaded by Ethernet port 4.1.3.6.1.4.1.319.1.4.4.0.0.0Long(64)Ditto0Ditto
Connection alarms of receiving cards 65-128 loaded by Ethernet port 4.1.3.6.1.4.1.319.1.4.4.0.0.1Long(64)Ditto0Ditto
Connection alarms of receiving cards 129-192 loaded by Ethernet port 4.1.3.6.1.4.1.319.1.4.4.0.0.2Long(64)Ditto0Ditto
Connection alarms of receiving cards 193-256 loaded by Ethernet port 4.1.3.6.1.4.1.319.1.4.4.0.0.3Long(64)Ditto0Ditto
PSU alarms of receiving cards 1-64 loaded by Ethernet port 4.1.3.6.1.4.1.319.1.4.4.0.0.4Long(64)Ditto0Ditto
PSU alarms of receiving cards 65-128 loaded by Ethernet port 4.1.3.6.1.4.1.319.1.4.4.0.0.5Long(64)Ditto0Ditto
PSU alarms of receiving cards 129-192 loaded by Ethernet port 4.1.3.6.1.4.1.319.1.4.4.0.0.6Long(64)Ditto0Ditto
PSU alarms of receiving cards 193-256 loaded by Ethernet port 4.1.3.6.1.4.1.319.1.4.4.0.0.7Long(64)Ditto0Ditto
SNMP SET（Read and Write）
SNMP Trap server.1.3.6.1.4.1.319.1.5.0.0.0.1StringIP address and port number while reporting SNMP Trap request Format: IP/PORT (The IP address and port number must be in this format, otherwise “bad value” will be displayed.)127.0.0.1/162192.168.1.112/163