Page History

Step 1 Choose > Player Management > Remote Control Plan.

Step 2 Click New. Enter a name and select a type for the control plan, then click OK.

The Command plan tab page is displayed.

Plan types include player restart, screen status control, video source switching, power control, volume control, and brightness control.

Figure 7-4 Creating a remote control plan

Step 3 Click Add, select a command, and set the execution plan, then click OK.

The command here is based on the plan type you selected when you create the plan.

Figure 7-5 Adding a command

Step 4 To add an automatic control command for brightness control, set the automatic brightness control parameters, namely, the relationship between the ambient brightness and screen brightness.

1.At the upper right of the Command plan tab page, click Set Auto Brightness Control Parameters, as shown in Figure 87-6.

  Figure 7-6 Setting automatic brightness control parameters

2.In the dialog box that appears, divide the ambient brightness range into several sections and specify a screen brightness for each section.

  Figure 7-7 Setting brightness mapping table

3.Click OK.

Related Information

If a remote control plan is applied to a player, modifying the plan here and in the player attributes do not affect each other.

Operating Procedure

Step 1 Choose > Player Management > Remote Control Plan.

Step 2 Select a remote control plan and click Attribute, or click the remote control plan name.

The attributes of the remote control plan are illustrated in Table 87-3.

Table 7-3 Remote control plan attributes

Step 3 After the attribute editing is done, click Save or Save & Close.