Wired Network
Connect an Ethernet cable to the Ethernet port on the device.
Wi-Fi Network
ViPlex Handy
Step 1 Connect your phone to the Wi-Fi AP of the device. (The default SSID is "AP+Last 8 digits of SN" and the default password is printed on the SSID label of the product.)
Step 2 Open ViPlex Handy and tap Add Device.
Step 3 On the Device Management page, search for and connect to the device. (The user name is "admin" and the default password is “SN2008@+”.)
Step 4 Return to the homepage and choose Screen Management > Network Settings > Wireless Network to turn on Wi-Fi and select or add a network.
ViPlex Express
Step 1 Open ViPlex Express. Turn on DHCP Service at the the bottom left, select a local IP address and click OK.
Step 2 Click Refresh to refresh the device list. Connect to the device. (The user name is "admin" and the default password is “SN2008@+”.)
Step 3 Choose Terminal Control > Network configuration.
Step 4 Select the target device from the device list.
Step 5 Go to Wi-Fi Network > Player Wi-Fi AP and do the following as required.
- AP: Turn on/off the device Wi-Fi AP.
- Hotspot Name and Password: Change the SSID and password of the terminal Wi-Fi AP. (The default SSID of the Taurus series and EMP400B is "AP+Last 8 digits of SN" and the default password is printed on the SSID label of the product.)
- Isolate from Local Network: After enabled, the Wi-Fi AP of the terminal is isolated from the local network and users cannot access the local network by connecting to the Wi-Fi AP.
- Advanced > Channel: Switch the channel of the Wi-Fi AP. (The channel can be switched when the terminal software is V2.2.0 or later.)
Figure 1 Player Wi-Fi AP configuration
Step 6 Click Apply.